Filter
Top Products
3
2. Parts Names
˚F˚C
˚F˚C
ERROR CODE
AFTER
TIMER
TIME SUN MON TUE WED THU FRI SAT
ON
OFF
Hr
AFTER
FILTER
FUNCTION
ONLY1Hr.
WEEKLY
SIMPLE
AUTO OFF
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY
MONITOR/SET
CLOCK
ON/OFF
Wired Remote-Controller
Note:
“PLEASE WAIT” message
This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power fail-
ure.
“NOT AVAILABLE” message
This message is displayed if a button is pressed to operate a function that the indoor unit does not have.
If a single remote controller is used to simultaneously operate multiple indoor units that are different models, this message will not be displayed if
any of the indoor units is equipped with the function.
Display Section
Operation Section
Identifi es the current operation
Shows the operating mode, etc.
* Multi language display is sup-
ported.
“Centrally Controlled” indicator
Indicates that operation of the re-
mote controller has been prohibited
by a master controller.
“Timer is Off” indicator
Indicates that the timer is off.
“One Hour Only” indicator
Displayed if the airflow is set to
low and downward during COOL
or DRY mode. (Operation varies
according to model.)
The indicator goes off after 1 hour
when the airflow direction also
changes.
Temperature Setting
Shows the target temperature.
Up/Down Air Direction indi-
cator
The indicator shows the direc-
tion of the outcoming airfl ow.
Day-of-Week
Shows the current day of the week.
Room Temperature display
Shows the room temperature. The room
temperature display range is 46-102 °F.
The display blinks if the temperature is
less than 46 °F or 102 °F or more.
Time/Timer Display
Shows the current time, unless the simple or Auto Off
timer is set.
If the simple or Auto Off timer is set, shows the time re-
maining.
Louver display
Indicates the action of the swing louver.
Does not appear if the louver is station-
ary.
(Power On indicator)
Indicates that the power is on.
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.
“Sensor” indication
Displayed when the remote controller
sensor is used.
“Locked” indicator
Indicates that remote controller but-
tons have been locked.
“Clean The Filter” indicator
Comes on when it is time to clean the
fi lter.
Timer indicators
The indicator comes on if the corre-
sponding timer is set.
Opening the
lid
Built-in temperature sensor
Down
Up
Back
Ahead
To return operation
number
To go to next opera-
tion number
Set Temperature buttons
Timer Menu button
(Monitor/Set button)
Mode button (Return button)
Set Time buttons
Timer On/Off button
(Set Day button)
ON/OFF button
Fan Speed button
Test Run button
Filter button
(<Enter> button)
Check button (Clear button)
Airfl ow Up/Down button
Louver button
(
Operation button)
Ventilation button
(
Operation button)
For purposes of this explanation,
all parts of the display are shown.
During actual operation, only the
relevant items will be displayed.