Filter
Top Products
5
°F
TIMER
MON
OFF
WEEKLY
SUN MON TUE WED THU FRI SAT
WEEKLY
°F
°F
TIME SUN
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
Day of the Week
& Time display
°F
°F
TIME SUN
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY
MONITOR/SET
CLOCK
ON/OFF
1. Press the or Set Time button
1
to show display
2
.
2. Press the Timer On/Off (Set Day) button
9
to set the day.
* Each press advances the day shown at
3
: Sun → Mon → ... → Fri →
Sat.
3. Press the appropriate Set Time button
1
as necessary to set the time.
* As you hold the button down, the time (at
4
) will increment fi rst in
minute intervals, then in 10-minute intervals, and then in 1-hour inter-
vals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button
4
to lock in the values.
Time Setting
TIME SUN
Day of the Week Setting
4. Setting the Day of the Week and Time
°F
°F
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY
MONITOR/SET
CLOCK
ON/OFF
5.1. Turning ON/OFF
<To Start Operation>
Press the ON/OFF button
1
.
• The ON lamp
1
and the display area come on.
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
Function Selection of remote controller:
Set the functions and ranges available to the
remote controller (timer functions, operating
restrictions, etc.)
Set Day/Time: Set the current day of the week or time.
Standard Control Screens:
View and set the air conditioning system’s op-
erating status
Timer Monitor: View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
Timer Setup: Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
<How to change the screen>
A
: Hold down both the Mode button and the Timer On/Off button for 2
seconds.
B
: Press the Timer Menu button.
C
: Press the Mode (Return) button.
D
: Press either of the Set Time buttons ( or ).
Function Selection of remote controller
Set Day/Time
Standard Control Screens
OFF ON
Timer Monitor Timer Setup
ADC
BC
B
3. Screen Confi guration
5. Operation
<To Stop Operation>
Press the ON/OFF button
1
again.
• The ON lamp
1
and the display area go dark.
Note:
Even if you press the ON/OFF button immediately after shutting down the op-
eration is progress, the air conditioner will not start for about three minutes.
This is to prevent the internal components from being damaged.
˚F
COOL
1
2
6
7
5
3
2
5
6
7
3