Filter
Top Products
Net Safety Monitoring Inc
MLP-A/AR/AD-ST1400-25 8
NON-ISOLATED/ISOLATED WIRING
Terminal Connection
Figure 7: Non-isolated Terminal Connection
Figure 8: Isolated Terminal Connection
Current Output
To set an isolated current output, simply move the Jumper (shorting jack) to the
isolated current position (refer to Figure 9, "Jumper Positions", on page 8).
Note: Unless otherwise specified, all models ship with non-Isolated current
output.
Figure 9: Jumper Positions
RST
+24V
COM
4-20
ISO
Power
to Monitor
Supply
Terminal Board
Power Terminal Strip
RST
+24V
COM
4-20
ISO
Power
to Monitor
Supply
Terminal Board
Power Terminal Strip
Jumper—Position Jumper
(shorting jack) over pins to
set power source for current
output.
Position3&2=
Non-isolated (default)
Position 1 & 2 = Isolated
Termination Jumper—Is non-
functional in this application
and can be placed in any
position or removed
entirely.
Terminal Board
Sensor Board