Filter
Top Products
Operating Instructions Client Reference
184
Note
❒ When you open the Printer Properties dialog box for the first time after installing the RPCS printer
driver, the confirmation window appears. After that, the initial display of the Printer Properties di-
alog box appears.
D
DD
D
Make the necessary settings, and then click [OK].
Note
❒ Settings you make here are used as the default settings for all applications.
❒ Do not set [
Form to Tray Assignment
].
-
--
-If a message is displayed during installation of the printer driver
When there is a driver in the computer that is newer than the one currently being installed, a message
dialog box appears.
In such a case, you cannot install with the Auto Run program. Use the driver that was used in installing
the driver that is displayed in the message, and reinstall with [Add Printer].
A Click [Start], point to [Settings], and then click [Printers].
B Double-click the [Add Printer] icon.
C Follow the wizard to install the driver.
If the printer driver disk is a CD-ROM, the sources of installation are as follows. If the installer starts
up, click [Cancel] to quit it.
• PCL 5c
DRIVERS\PCL5C\WIN2K_XP\(Language)\DISK1