Microsoft 98ME Window User Manual


 
Operating Instructions Client Reference
25
Printing without Using a Print Server
Preparation
To use a printer connected to the Ethernet interface, IEEE 802.11b (Wireless LAN) interface or IEEE
1394 (IP over 1394) interface, select "SmartNetMonitor" when installing the printer driver.
Configuring the Protocols
Configuring TCP/IP and IPP for Printing
Follow these instructions to configure the printer and Windows 95/98/Me to use the TCP/IP protocol
and IPP.
Configuring the printer
Configure the printer to use the TCP/IP protocol.
Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)
Assign an IP address and make other settings required for using the TCP/IP protocol.
Reference
For more information about how to make the above settings, see Configuring the printer for the
Network in the Quick Installation Guide.
If DHCP is used to assign IP addresses, see Appendix, When Using DHCP in the Administrator
Reference.
Under Windows Me, when you want to use the IP over 1394, see the Option Setup Guide.