Filter
Top Products
36 XR20 Appendix
1. Call the panel phone number. The panel answers and sounds one
short tone.
2. Enter your code within 8 seconds. One beep means the code is
good. Four short beeps means enter it again. You have 3 tries.
3. You have 30 seconds to enter the first command (see other side)
and 30 seconds for each additional command.
If You will hear
All areas are armed 3 short beeps
Area 1 (Perim) is armed 1 short beep
Any area is armed 2 short beeps
All areas are disarmed 1 long beep
1. Call the panel phone number. The panel answers and sounds one
short tone.
2. Enter your code within 8 seconds. One beep means the code is
good. Four short beeps means enter it again. You have 3 tries.
3. You have 30 seconds to enter the first command (see other side)
and 30 seconds for each additional command.
If You will hear
All areas are armed 3 short beeps
Area 1 (Perim) is armed 1 short beep
Any area is armed 2 short beeps
All areas are disarmed 1 long beep
895 Voice Module
You can also use the 895 Voice Module with the XR20 Command
Processor™ panel. The 895 allows you to call your security system
using a touchtone telephone, and perform a variety of functions,
ranging from arming and disarming to changing user codes. The 895
operates much like a voice mail system, providing you with easy to
follow English language prompts.
The 895 Voice Module provides you with easy-to-understand prompts
that lead you through the steps to control your security system.
Using your present User Code and User Code Level, you will have
access to the same options of your system using the 895 as you would
when using a keypad to control your security system.
The 895 Voice Module easily mounts into the enclosure presently
housing your XR20 Command Processor™ panel. The standard three-
hole configuration allows for easy and quick installation.
For more information about the 895 Voice Module, refer to LT-0421,
the 895 Voice Module User's Guide.