Filter
Top Products
14 XR20 User Menu
User Check-in
User Code Level: Master or Standard
Function: This feature allows you to monitor the arrival of children
from school or employees to work by having a special Check-in
Report sent to your alphanumeric or numeric pager. Your system
must be programmed for the Pager Direct™ option. The Appendix
section of this guide contains Quick Reference cards for your wallet
or purse.
Sending a Check-in Report:
1. After disarming the system, access the User Menu.
You may also press the COMMAND + 7 and then enter your user
code to send a Check-in Report.
2. At the USER CHECKIN? display, press any Select key. The
keypad displays USER CHECKIN: 22 ( 22 = user number).
3. The panel sends the Check-in Report containing your account
number and user number to the pager.
Zone Activity Check
User Code Level: Master or Standard
Your security system may be programmed for the Zone Activity
Check feature to monitor a person for non-activity. This could be
used for a person living alone to detect when they have not tripped
a disarmed zone within a programmed period of time. This feature
can be programmed for you at any time.
Function: This option allows you to enable or disable the Zone
Activity Check which monitors your system for no zone activity.
When the programmed time period is exceeded because no activity
is detected, your keypads will sound a steady tone and display PRESS
ANY KEY. Pressing any key on the keypad restarts the no activity
programmed time period and prevents your system from sending a
“User Activity Not Detected” report to the central station.
Note: The Zone Activity Check is disabled when a schedule is
entered to allow for sleeping hours and is automatically enabled
when an area is armed or disarmed.
Selecting Zone Activity Check:
1. At the ACTIVITY CHECK? display, press any Select key. The
keypad displays ENABLE? YES NO. The default is YES.
2. When NO is selected, the keypad displays CHECK DISABLED for
four seconds and then sends the Activity Check Disabled
message to the central station.
3. When YES is selected, the keypad displays CHECK ENABLED for
four seconds and then sends the Activity Check Enabled message
to the central station.