Filter
Top Products
18 XR20 User Menu
User Codes
User Code Level: Master only.
Function: Allows you to add or delete a user from the system or
change their user code or authority level.
There are three characteristics associated with each user code:
10 3812 Master
User Number User Code Authority Level
User Number - Your system supports 32 users. Each user is
numbered from 1 to 32. This number identifies them to the system
and is transmitted to the central station (if your system is monitored)
when they arm or disarm the system.
User Code - Users also have a 4-digit user code they enter into the
keypad when arming or disarming. This user code is kept secret
from other users and is not transmitted to the central station when
they arm or disarm.
Users enter only their own user code when operating the system.
Authority Level - The user is also assigned a level of authority
(Master or Standard) by the person administrating the system that
determines the functions they can access.
The table to the right lists system functions users are allowed to
access based on the authority level assigned to their codes at the
time they are added to the system.
User Code Authority Levels
Adding User codes
1. Access the User Menu. Press the COMMAND key until USER
CODES? displays.
2. Press any Select key. The keypad displays ADD DEL CHG.
3. Press the Select key under ADD to add a new user code.
(You must have a Master user level to add a user.)
4. At the USER NUMBER: - prompt, enter a user number and
press COMMAND.
5. The displays changes to CODE NO:. Enter the user code and
press COMMAND.
System Options Standard Master
Sensor Reset ✔✔
Outputs On/Off ✔✔
Bypass Zones ✔✔
Zone Monitor ✔✔
System Test ✔✔
Arm and Disarm ✔✔
Display Events ✔✔
Schedules ✔
Date and Time ✔
User Codes ✔