Filter
Top Products
3MS9470/MS9770/MS9970
1 GENERAL
• Marmitek systems are designed for use in dry environments.
• Avoid placement of system components in environments with extreme temperatures (normal operation is 0-40°C) or humidity.
• Only the supplied PS500 Mains Adapter can be used to power the SC2800 base station and preferably alkaline batteries should be used for the sensors
and remote. Do not use rechargeable batteries!
• Marmitek equipment is CE approved, and has radio transmission approvals for most countries.
• Always carefully follow the instructions in the users’ guide.
2 SAFETY PRECAUTIONS
• There is a hazard of electrical shock or injury if the system (the PS500 in particular) is installed in any other way than recommended in this manual.
The electrical parameters, especially with respect to the mains voltage listed on the PS500, must be observed at all times.
• Only Marmitek Authorised Service Centres (MASC’s) are qualified to repair the system. Unauthorised opening of any parts of the system voids the warranty.
• It is highly dangerous to open the PS500 Mains Adapter as it contains parts carrying 230 V mains voltage. In case of malfunction of the PS500
Mains Adapter, unplug the system and contact your dealer.