LST HB216AE.SAM Smoke Alarm User Manual


 
8 Index
Activation condition of actua-
tions, 55
Actuation, 21
- Display, 38, 41
- Light-emitting diode, 25
- Operate, 41
- Two-zone dependency, 56
Alarm counter, 44
Alarm delay, 18
- Alarm delay procedure, 11, 32
- Button, 26
- Day/night-operation, 32
- Day / night operation, 26
- Delay time, 12
- Exploration time, 32, 53
- Reaction time, 32, 53
Alarm verification, 11
Alarming device, 15, 20, 26
- Display, 43
- Number, 20
- Operate, 43
- Primary, 11, 26, 31
- Reactivate, 31
- Silence, 31, 54
- Two-zone dependency, 43
Ambient condition, 9
Approvals, 10
Area filter, 23, 27, 43, 44, 50
Authorization
- Change code, 47
- Enter code, 36
- Exit, 34, 47
- Light-emitting diode, 25, 36
- Wrong input, 36, 37
Authorization level, 29, 30
- Enter, 36
- Exit, 30, 36
AUTO-setup, 11, 18
BCnet sectional control panel,
11
Buzzer, 25, 27
- Reminder, 27
- Silence, 27, 31
Clock, 18
- Clock time correction, 45
- Clock time setting, 45
- Date setting, 45
- Summer/wintertime, 45
- Timer, 18
Competent installer, 11
Componentry
- Display, 46
Deceptive alarm, 11
Dependency
- Two detectors, 12, 55
- Two zones, 14
Detection area, 12
Detector
- Fault detector, 20
- Fire detector, 19
- Technical detector, 20
Detector line, 12
Detector zone, 12, 20
- Alarm criteria, 39
- Display, 39
- Number, 20
- Operate, 39
Detector zone alarm
- Reset, 54
Detector zone elements
- Operate, 40
Disablement
- Display, 38
- Light-emitting diode, 25
Disablement condition, 61
Display test, 31, 44
Element-button, 24
Energy fault, 25
Event counter, 44
Event memory, 18, 43, 68
- Filter, 18, 44
Exploration time, 12, 26, 32, 51
False alarm, 12
Fault
- What to do, 9
Fault detector, 12
Fault message
- Display, 38
Fault message condition, 58
Features, 17
Fire alarm
- Display, 37
- Terminate, 54
- What to do, 9, 52
Fire alarm condition, 50
Fire brigade
- Information devices, 21
- key depot, 21
- key safe, 21
Fire brigade control unit, 12,
17, 21
- Operation functions, 48
Fire control system, 12, 15, 21,
55, 66
Fire detector
- Automatic, 12
- Dirt message, 19
- Non automatic, 12
Function test, 65
- Alarming device, 66
- Detector, 65
- Fire control system, 66
- Fire detection control panel, 65
- Other, 66
- Stand-by battery, 65
- Transmitting device, 66
GSSnet
- Line fault, 61
- Member, 12, 19, 28
- Member fault, 61
- Member number, 28
- Repeater, 19
INFO-bus, 18
Info-button, 24
Installer, 7, 11
Installer code, 30, 36
- At delivery, 47
- Change, 47
- Lost, 30
Interdependence of two detec-
tors, 12
- Disabled detector, 40, 61
- Fault of a detector, 59
- Fire alarm condition, 55
LC-display, 23
- Adjusting the contrast, 44
- Illumination, 23
LED-display field, 27
Loop, 13, 17
Main operating unit, 13, 29, 44
Maintainer, 13
Maintenance, 9, 13, 63, 67
- Forecast, 19
- Maintenance prognosis, 41
- One-man, 63, 65
Manual call point, 12, 15
Measured value
- Abort print-out, 46, 47
- Display, 41, 42, 43
- Print, 46
Menu-quick-operation, 33
Menu buttons, 24
Network, 19
Normal condition, 23, 50
Numeric keys, 24
Operating authorization, 29
Operating condition, 49
- Activation cond. of actuations,
55
- Disablement condition, 61
- Fault-message condition, 58
- Fire alarm condition, 50
- Normal condition, 50
- Priority, 49
- Technical message, 56
- Test condition, 63
Operation menu, 33, 34
Optional case, 18
Organization in case of an
alarm, 9, 13
Panel reset, 31, 54, 57
- Button, 25
Power supply, 18
- Energy fault, 25
- Total shut down, 23
Pre-alarm, 13, 55
- Display, 37
Primary alarming device, 13
Primary transmitting device, 13
Print-out, 46
- Measured value, 46
- Repeat, 47
- Service, 46
- Settings, 46
Printer, 18, 21, 27, 46
- Out of paper, 28
Printer filter, 27, 46
Protocol printer, 27, 47
Reaction time, 32
Reconditioning, 67
Remote maintenance, 18
Sectional control panel, 11, 17,
19, 29
- Operable, 22
Self-control, 10, 58, 65
Serial interface, 18, 21
Setting the parameters, 13
Signs of fire, 13
Siren output, 26
HB216AE.SAM / 0130 / AN9161202
ZN5002/73/72
72
Chapter 8 Index User Manual Series BC216 / Part A