Filter
Top Products
Additional information (e.g., date and time of the test procedure, the number of current test procedures,
hints for operating the menu, hints for authorization) can be displayed by using the 'Info'-button. You
can scroll through all current test procedures by using the '
↑↓
'-buttons.
The following test conditions are displayed on the LC-display of the control panel:
Condition Displaying (1st line)
Test condition of a detector zone (e.g., Nr. 4) for fire alarm
1.TEST COND 0004
Test condition of an element (e.g., Nr. 29) of a detector zone (e.g., Nr. 4)
for fire alarm
1.TEST COND 0004/029
Test condition of a detector zone (e.g., Nr. 3) for technical messages
1.TECH.TEST 0003
Test condition of an element (e.g., Nr. 5) of a detector zone (e.g., Nr. 3)
for technical messages
1.TECH.TEST 0003/005
Test condition of a detector zone (e.g., Nr. 5) for faults
1.FLT.TEST 0005
Test condition of an element (e.g., Nr. 14) of a detector zone (e.g., Nr. 5)
for faults
1.FLT.TEST 0005/014
Alarm of a detector zone (e.g., Nr. 4) for fire alarm, being put in test
condition
1.TEST-AL 0004
Alarm of an element (e.g., Nr. 29) of a detector zone (e.g., Nr. 4) for fire
alarm, being put in test condition
1.TEST-AL 0004/029
Alarm of a detector zone (e.g., Nr. 3) for technical messages, being put in
test condition
1.TECH.T-AL 0003
Alarm of an element (e.g., Nr. 5) of a detector zone (e.g., Nr. 3) for tech-
nical messages, being put in test condition
1.TECH.T-AL 0003/005
Alarm of a detector zone (e.g., Nr. 5) for fault messages, being put in test
condition
1.FLT.T-AL 0005
Alarm of an element (e.g., Nr. 14) of a detector zone (e.g., Nr. 5) for fault
messages, being put in test condition
1.FLT.T-AL 0005/014
Test activation of a transmitting device (e.g., Nr. 1)
1.TR-DEV.TEST 01
Test activation of an alarming device (e.g., Nr. 1)
1.AL-DEV.TEST 01
Test activation of an actuation (e.g., Nr. 1)
1.ACTU.TEST 0001
Test activation of an element (e.g., Nr. 4) of an actuation (e.g., Nr. 1)
1.ACTU.TEST 0001/004
Table 6: Messages of test conditions
You terminate a test procedure by disabling the corresponding detector zone. The displays of test con-
ditions remaining in the display memory are renumbered in the order of their occurrence.
HB216AE.SAM / 0130 / AN9161202
ZN5002/73/64
64
Chapter 5 • Operating conditions of fire detection control panels Series BC216 User Manual Series BC216 / Part A