Filter
Top Products
27
Displaying EP-80R TH Temp Sensor Information
The Overlay Data function will be used to show temp sensor data on
your unit's main display.
NOTE:
Make sure your temp sensor has been configured before attempting
to display temperature data on your display unit.
To add temp sensor as overlay data:
1. Press MENU, highlight OVERLAY DATA and press ENTER.
2. Select
(PRESS ENT TO ADD…) and press ENTER.
3. Highlight
NMEA 2000 and press ENTER. A list of devices on the net-
work will appear.
4. Select the desired temp sensor and press
ENTER. Its temp type (con-
figuration) will appear underneath it next to a checkbox.
5. Highlight the temp type and press
ENTER, which will place a check-
mark in its checkbox. It now will be shown as overlay data on your
unit's main display.
6. Repeat steps 4 and 5 to display the other temp sensor data, or press
EXIT repeatedly to return to the main display.