13
Customizing Pages
The customizing pages feature allows you to choose what data will be
displayed and how it will be displayed on select pages. You can custom-
ize the Gauge, Single Digital and Dual Digital pages with temp sensor
data.
To customize Gauge page:
1. After the Gauge page has been added to the page screen rotation, use
the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU.
3. Highlight
TEMP and press MENU. The Select Temp menu will appear
with three temp types: Inside, Water and Outside.
4. Select the desired temp type and press
MENU. You will be taken back
to the main display.
To customize Single Digital page:
1. After the Single Digital page has been added to the page screen rota-
tion, use the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU.
3. Highlight
TEMP and press MENU. The Select Temp will appear, allow-
ing you to choose from three temp types: Inside, Water and Outside.
4. Select the desired type and press
MENU. You will be taken back to
the main display.
To customize Dual Digital page:
1. After the Dual Digital page has been added to the page screen rota-
tion, use the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU. The Position menu will
appear with two options: Top Data and Bottom Data.
3. Select the desired data position and press
MENU.
4. Highlight
TEMP and press MENU. The Select Temp menu will appear
with three temp types: Inside, Water and Outside.
5. Select the desired type and press
MENU. You will be taken back to
the main display. Repeat these steps to customize the other data posi-
tion.