20
5. Highlight
TEMPERATURE and press ENTER. The Select Temp menu will
appear with three temp types: Water Temp, Outside Temp and Inside
Temp.
6. Select the desired temp type and press
ENTER. You will be directed to
the Position menu. Repeat steps 4 and 5 to customize the other posi-
tion, or press
EXIT twice to return to the main display.
To customize Quad Analog page:
1. Make sure the Quad Analog page has been added to the page screen
rotation.
2. Use the
ENTER and EXIT keys to scroll the Quad Analog page onto the
main display.
3. Press
MENU, select CUSTOMIZE and press ENTER. The Position menu
will appear with four options: Top Left, Top Right, Bottom Left and
Bottom Right.
4. Select the desired position and press
ENTER. The data menu will ap-
pear.
5. Highlight
TEMPERATURE and press ENTER. The Select Temp menu will
appear with three temp types: Water Temp, Outside Temp and Inside
Temp.
6. Select the desired temp type and press
ENTER. You will be directed to
the Position menu. Repeat steps 4 and 5 to customize the other posi-
tions, or press
EXIT twice to return to the main display.
To customize Single Digital page:
1. After the Single Digital page has been added to the page screen rota-
tion, use the
ENTER and EXIT keys to display it on the main screen.
2. Press
MENU, use the UP and DOWN keys to select CUSTOMIZE and press
ENTER. The data menu will appear.
3. Select
TEMPERATURE and press ENTER. The Select Temp menu will ap-
pear with three temp types: Water Temp, Outside Temp and Inside
Temp.
4. Select the desired temp type and press
ENTER.
To customize Dual Digital page:
1. After the Dual Digital page has been added to the page screen rota-
tion, use the
ENTER and EXIT keys to display it on the main screen.
2. Press
MENU, use the UP and DOWN keys to select CUSTOMIZE and press
ENTER. The Position menu will appear with two options: Top Data and
Bottom Data.
3. Highlight the desired data position and press
ENTER.