Filter
Top Products
5
Pre-Installation
features
Installation Options
Residential - Vented Vertical Only
Manufactured (Mobile) Home
Natural Gas Or Propane (LP)
Bedrooms
Optional Wall-mounted Or Remote Thermostat
Electrical
The fan motor requires 120 Volts AC for operation. The
fireplace is not dependent on the fan or an outside electrical
supply to operate.
Millivolt Valve
This insert is operated with a millivolt valve and therefore
burns even during a power outage.
Fuel
This insert comes from the factory equipped to burn natural
gas at a specified elevation. The insert can be converted
to burn LP (liquid propane) by installing a conversion kit.
Only Lennox Hearth Products conversion kits can be used
to convert from NG to LP or LP to NG. Contact your Lennox
Hearth Products dealer for details.
paCkaging list
To install a Firestar insert, an insert body, and surround
(flange) kit are required.
Insert Body Packaging List
1 Insert Body with Burner Cassette and trivet
1 Set of Refractory Brick Panels - 3 pieces (H5866)
1 Log Set (H5860)
1 Lower front 2” filler panel
1 Fasteners: 6 slotted 1/4" truss screws
4 speed nuts
6 spring clips
4-3/8” x 3” leveling bolts
2 socket head screws
1 Installation and Operation Manual
Surround Kits - One Required
29 X 41” Black Trim (75072)
29 X 48” Black Trim (75073)
33 X 41” Black Trim (75074)
33 X 48” Black Trim (75075)
Surround Kit Contents
1 Top Surround
2 Side Surrounds
3 Black Trim Pieces
2 Elbowed Trim Fasteners
RATINGS Firestar™ (GC3)
NATURAL GAS LP GAS
MAX/MIN INPUT BTUH 0-2,000 FT (0-610 M)
u
39,000/27,500 39,000/22,600
MANIFOLD PRESSURE (IN. WC)
1.7 - 3.5 3.5 - 10.0
MIN./MAX. INLET PRESSURE (IN. WC)
5.0 - 10.5 10.5 - 13.0
MAXIMUM HEAT OUTPUT BTUS/ HOUR “STEADY STATE” 31,200 31,200
ORIFICE (DMS) 0-2,000 FT (0-610 M)
u
#37 #52
u Unit factory equipped for 0-2000 FT/0-610 M