Filter
Top Products
The attached
hose swivels to
make cleaning swivel-
easier in every
direction.
Remove the Hose
hose from the clip
hose clip by
pulling straight
out,
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME MODELS
Crevice
Tool
Remove the
telescoping
-Telescoping wand from
Wand itSstorage
position_
Remove the crevice tool from its storage
position in the wand, Turn the locking ring to
the UNLOCK position.
Extend the wand to its full length,,Turn the
locking ring to the LOCK position° Attach
the extension wand onto the open end of
the hose
Lower_'_,_ _ Suction
Wan_ __on_tr_ Slide
Align the tabs on the extension wand with
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach
with the attachments, add the
crevice tool to the end of the
wand by insertingand
twistingslightly. Hose-
Suction
Control
Wand,
Crevice
Toot
_Ralsed
When using the dusting brush or the combi-
nation brush, they may be attached directly
to the wand or placed on the end of the
crevice tool.
Crevice Tool _"
Dusting Brush Wand
I/ _ (s°me M°defs) f_---T--7" _=
_]/_l r Brush (Some t _ _ I ,
Models) LJ Brush
TO OPERATE SUCTION CON-
TROL SLIDE
Telescoping Wand
When using attachments for cleaning
draperies, small rugs with tow pile and other
delicate items,twist the suction control slide
to the open position, This Iever is located on
the telescoping wand, close to the hose,,
This will reduce suction for ease of cleaning,
Note: Return
suction control
slide to the closed
position for
normal cleaning,
Suction
Control
Slide
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching. Trying to reach
beyond the hose stretch capability
...couldcause the cle,a,nerto,.,tipover.