Filter
Top Products
WARNING
Electrical Shock Hazard
Do not plug Into the electrical sup-
ply until the assembly is complete,,
Failure to do so could result in elec-
trical shock or injury°
i i ii iNil,,,ll ii
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List.,Use this list to verify that
you have received all the components of
your new Kenmore vacuum,
__ Remove the
tape located
below the dust
covedlilter cover
on the motor
•_\ _.-_.._ _, ., case
end to nozzle as ',
shown
HANDLE ASSEMBLY
Remove the screw iocated just below the
top edge of the back of the vacuum
Position the handle as shown in the il{ustra-
tion below
Slide {he handle into the opening at the top
of the vacuum
Handle
Screw
Hole
Insert the screw so it passes through the
handle intothe vacuum
Begin to tighten the screw with your fingers
It may be necessary to adjust the handle
slightly.