■ Enter the password for the device admin user. You set the password for
admin when you ran the ACM Wizard.
■ Enter the password for the device root user. You set the password for root
when you ran the ACM Wizard.
NOTE: In NSM, passwords are case-sensitive.
■ Select SSH Version 2 and port 22.
Click Next.
The Wizard displays a page where you can verify the integrity of the connection
between the IDP appliance and NSM. Please wait a moment as the NSM retrieves
SSH key fingerprint information from the IDP appliance.
Figure 14: NSM Add Device Wizard: SSH Key Fingerprint Information
Adding a Reachable IDP Device to NSM ■ 43
Chapter 7: Adding the IDP Appliance to NSM