Filter
Top Products
Table 11: IDP On-Box Utilities (continued)
UsageSoftware
You can use the idp.sh utility to start, stop, or get status information on
appliance processes.
For details, see the IDP Administration Guide.
idp.sh utility
You can use the sctop utility to monitor connection tables and view status.
For details, see the IDP Administration Guide.
sctop utility
You can use bypassStatus commands to display settings for the daemon
that monitors traffic interface NIC state.
For details, see the IDP Administration Guide.
bypassStatus
utility
You can use the IDP Reporter to view statistics on attacks IDP has detected
and responded to, as well as application volume tracking (AVT) statistics.
For details, see the IDP Reporter User’s Guide.
IDP Reporter
Centralized Management with NSM Overview
Juniper Networks Network and Security Manager (NSM) is a central management
server capable of managing hundreds of IDP appliances and other Juniper Networks
devices, such as ScreenOS firewalls, SA Series appliances, and IC Series appliances.
You typically deploy NSM in a management subnet accessible to the NSM-managed
devices.
Figure 9 on page 16 illustrates the flow of information between the tiers of the central
management solution: the NSM user interface, the NSM server, and IDP appliances.
Figure 9: IDP-NSM Communication
The IDP configuration, security policies, attack objects, and log records are stored in
NSM server databases and administered using the NSM user interface. Communication
between the NSM server and IDP appliances, and between the NSM server and the
NSM user interface, is encrypted and authenticated.
16 ■ Centralized Management with NSM Overview
IDP250 Installation Guide