Filter
Top Products
17
Figure 28. Lift the Burner Skirt up and out of the firebox.
Figure 32. Pilot Orifice replacement.
PILOT ASSEMBLY
Pilot Hood
Pilot Orifice
Retainer Clip
Figure 31. Move air shutter back to access the
burner orifice.
Burner Orifice
Figure 29. Frame latch and air shutter stem location.
Air Shutter
Wingnut
Pull Frame Spring
Latch to release.
Air
Shutter
Burner Tube
Figure 30. Move shutter forward to disengage the
burner tube assembly. .
4. Change the Pilot Orifice:
• FROM WITHIN THE FIREBOX, disengage the
Pilot Hood by releasing the retainer clip as
shown in fig. 32. Using the 4 mm hex key
supplied, unscrew the pilot orifice (counter-
clockwise). Replace with the appropriate
orifice:
#51 for Natural gas
#30 for Propane
Tighten new orifice into the base of the pilot
assembly.
• Replace Pilot Hood by pushing it into the
base.