Filter
Top Products
26
7. Pull electrode out of bracket.
8. Apply masking tape to the end of a 7 mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into the gas opening and press down onto
the gas orifice spud and remove by turning the gas orifice
spud counterclockwise and lifting out. Set gas orifice spud
aside.
9. Gas orifice studs are stamped with a letter and a number.
Install the Number 154 oven bake burner orifice spud.
10. Place LP gas orifice in plastic parts bag for future use and
keep with package containing literature.
11. Push down on the clip on the electrode bracket.
12. Replace oven bake burner electrode inside bracket.
13. Reinstall the oven bake burner and oven bake burner screws.
See Step 5 for illustration.
A.Grasp electrode here.
B. Bracket
A.Gas orifice spud
A
B
A
A. Oven bake burner electrode bracket
B.Electrode bracket clip
A. Oven bake burner electrode
B.Oven bake burner electrode bracket
A
B
A
B