Filter
Top Products
44008-01 • 02/10/10 • Hunter Fan Company
8
8
e hour and am/pm indicator will be ashing for program 2. Follow the same process throughout all 4 programs.
Once complete, press
ret/clear
to return to the main screen or wait 15 seconds.
You may review your programs by pressing the
program
button to enter program mode and
prog/day
9 times to reach everyday
program mode. Once in everyday, use the
program
button to cycle through all 4 programs
Note: When reviewing your programs, ignore the programs under weekday and Monday - Friday. ese programs will not
aect everyday programming and can be ignored.
Once you are satised with your settings, press the
system
key to change heat or cool to the alternate mode for programming.
Once you are nished programming in the alternate mode, if you wish to activate auto season changeover, use the
system
button
to change to “auto” mode.
Everyday (Cont.)
2
.
Programming (Cont.)
3
.
Operation
Allows you to temporarily adjust the temperature, overriding the programmed set temperature. Temporary hold will only last
until the next program starts, at which time it will be cancelled and the new programs set temperature will be used.
To set Temporary Override:
Press and hold the or for 1 second or until the screen blinks. en repeatedly press the or until you
reach the desired temperature. You may press
ret/clear
or wait 15 seconds to return to the main screen. While temporary manual
override is active, the current program will ash.
To end temporary manual override:
Press the
ret/clear
button. e current program number will stop ashing and your current programs set temperature will be
active.
Note: Auto season changeover will not operate while in temporary manual override. If temporary manual override is activated
while vacation hold is set, the number of days remaining will also be displayed on the screen.
Warning: when using any override feature, setting your heat very high or cooling very low will not heat or cool the house any
quicker. It will only take longer to reach the set point.
Temporary Manual Override
Overrides all programming until permanent manual override is released.
To set Permanent Override:
Press and release
hold
quickly. Hold should now alternate with the current day to indicate it is active. Permanent hold will
automatically adjust to the current room temperature. Hold the or button in for 1 second or until the screen ashes
and adjust the temperature if you wish to change the permanent manual override temperature.
To end permanent manual override:
Press the
ret/clear
button. Hold will disappear from the display and your set temperature will revert back to that of the current
programs.
Note: Auto season changeover will not operate while in permanent manual override. e thermostat must be actively running
programs for this feature to work.
Warning: when using any override feature, setting your heat very high or cooling very low will not heat or cool the house any
quicker. It will only take longer to reach the set point.
Permanent Manual Override
Vacation hold can be used to hold the thermostat at a set temperature for up to 30 days. e day the thermostat is set to
vacation hold is considered day 1. e last day in vacation hold, the thermostat will release vacation hold and revert back to
normal programming with program 4.
To set Permanent Override:
Press and hold the
hold
button for 3 seconds or until the display changes to vacation hold. e display will show day, set temp
and temp. Use the or buttons to change the set temperature to the temperature you want to hold. e
day/time
button
will set the number of days you want vacation hold to be active. To change your system mode press the
system
button. You can
also change the thermostat reporting location with the “ sensor” button, or the fan setting by using the
fan
button.
Vacation hold will return to the main screen after 5 seconds of the last key press.
Note: Auto season changeover will not operate in vacation hold. You will need to ensure your system is in the appropriate
system mode for your season, heat or cool.
Vacation Hold