Filter
Top Products
44008-01 • 02/10/10 • Hunter Fan Company
11
11
4
.
Features (Cont.)
Hunter’s Auto Recovery feature meets the ENERGY STAR® guidelines for energy eciency by allowing the heating or cooling
system to recover gradually from an energy-saving set point temperature to a comfort set point temperature.
Auto Recovery calculates how early to turn your system on, up to 30 minutes, so that the room temperature is already
comfortable by the start of the next program period. Without auto recovery, your system would reach the next program
period, turn on your system and run until the set temperature had been met. Auto Recovery works in both Heat and Cool
modes.
For example: If program 4 was set to run your heat, starting at 10:00 pm at 60
o
F until program 1 activates at 6:00 am at 68
o
F,
auto recovery would note the temperature dierence between 60°F and 68°F and turn the Heat on approximately 30 minutes
early. erefore, the room temperature at 6 am would be about 68°F instead of 60°F at the start of program 1.
Auto Recovery
* When the thermostat is in Auto Recovery mode, the display will alternate “RECOVERY” with the day, and the program
indicator will flash.
* Auto Recovery will not operate if Permanent hold, Vacation hold Temporary hold or Home Today is in operation.
* Auto Recovery can be canceled manually if
ret/clear
is pressed during the recovery process. If a recovery process is canceled
manually then the recovery process will not start again until the next program period starts (an exception is that if time or
program is changed then the thermostat will check Auto Recovery conditions immediately).
* Auto Recovery will be canceled and change to Temporary Manual Override mode if the set point is adjusted during the
recovery process.
* If the system changes between heat and cool (automatically or manually) then the thermostat will recalculate Auto Recovery
again. Set point temperature will be changed to the opposite system’s comfort temperature if the recovery entry criteria are
still met. Otherwise, the recovery process will be canceled and return to program control mode.
To activate or cancel auto recovery:
Press the
option
button 7 times to reach “recovery”. Press the or buttons to set your preference. Press
ret/clear
or wait 15
seconds to return to the main display.
Your thermostat allows you to switch between 12 hour and 24 hour time display.
To Switch between 12/24 hour time:
Press the
option
button 4 times to reach the “clock” setting and use the or buttons to change. You may also press the
option
button while setting the hour, minute, or day to change the time format.
12 / 24 Hour Time
e lock feature of this thermostat allows you to “lock” the thermostat from unwanted changes by other users. While locked,
when any key is pressed “Key Lock” will appear on the display for 1 second then disappear.
To lock / unlock the thermostat:
Press and hold the and buttons for 3 seconds or until the lock appears / disappears from the screen.
ermostat Lock
Allows you to change the temperature range to activate auto season changeover.
To change this feature:
Press the
option
button 6 times and use the or to select a temperature range. Press the
ret/clear
button or wait 15
seconds to return to the main display.
Deadband
e energy monitor feature stores the amount of time the heating and air conditioning system operates. is allows you the
oportunity to adjust your programs to save money on heating and cooling and to monitor trends in your heating / cooling
habits.
To review your energy usage:
press the “ energy monitor” button once to see todays usage. Continue to press the “ energy monitor” button to review usage
for yesterday, 11 days past, last 30 days, and total. To return to the main screen, press the
ret/clear
button or wait 15 seconds.
Energy Monitor