Filter
Top Products
44008-01 • 02/10/10 • Hunter Fan Company
12
12
4
.
Features (Cont.)
Your thermostat gives you option of changing the language displayed.
To change the language:
Press the
option
once and use the or to select a new language. Press the
ret/clear
button or wait 15 seconds to return to
the main display.
Language Selection
You can change the contrast of your display by adjusting the screen brightness.
To change this feature:
Press the
option
button 9 times and use the or to select a new display resolution. Press the
ret/clear
button or wait 15
seconds to return to the main display.
LCD Brightness
e span setting regulates when and how long your system will run. e span has been set at the factory to 2 which will allow
the system to turn on1
o
F
(.05
o
C) above or below the set temperature and run for 1
o
F
(.05
o
C) above or below the set temperature.
If your thermostat is set to turn on at 72
o
in heat mode, with a span setting of 2, your thermostat will activate your furnace at
71
o
and shut it down when it reaches 73
o
. For cooling at 72
o
with a span of 2,
your air conditioner will activate at 73
o
and shut
down at 71
o
. is setting can be changed to 1, 2, or 3. 1 will shorten your running time while 3 will lengthen it.
To change the span:
Press the
option
button 5 times for span. Use the or to change the span number. Press the
ret/clear
or wait 15 seconds
to return to the main display.
Span
You have the option of changing how your thermostat reports degrees between Fahrenheit and Celsius.
To change this setting:
Press the
option
button 3 times. Once on the Temp screen use the or to change between (F)ahrenheit and (C)elsius.
Press
ret/clear
once you are nished or wait 15 seconds to return to the main screen.
Fahrenheit / Celsius