Filter
Top Products
44008-01 • 02/10/10 • Hunter Fan Company
7
7
7 day programming allows you to set all 7 days of the week individually.
To program your thermostat in this manner:
1. Press the
program
button once to enter program mode and
prog/day
twice for 7 day programming.
2. Monday will be displayed at the top of your screen and your hour and am/pm indicator will ash. e system mode you
are programming will be displayed at the bottom of the screen (heat or cool). Use the or to set the starting hour of
program 1. Remember, to change between am and pm, you must pass the 12th hour, unless in 24 hour time.
3. To move to minutes, press the
program
button again. or will adjust the minutes in increments of 10.
4. Press the
program
button again to change to the temperature setting. e and will adjust the temperature for that
program.
5. Use the
system
button to change to your alternate system mode (heat or cool) and set the temperature for it using the
or buttons. You may also wait until you have one mode programmed and return later to program the other.
Note: e times for heating and cooling within each program period will always be the same.
6. At this time, you can use the “ sensor” or
fan
button to change the temperature reporting location or fan setting for this
program if you choose to change them.
7. Once you have nished with program 1, press
program
to change to program 2. e hour and am/pm indicator will be ashing
for program 2 and your system mode will be displayed at the bottom of the screen. Follow the same process throughout all
4 programs.
Once all 4 programs for Monday have been programmed, press
prog/day
to change to program 1 for Tuesday, which will be
displayed at the top of your screen. e same process as before will allow you to set all 4 programs for Tuesday and all other
days of the week and weekend.
Remember:
• e
program
button will change between hour, minutes, set temperature, and programs 1-4.
• e
and buttons will actually change the hour, minutes, and set temperature.
• “ sensor” will change the reporting location for the temperature and
fan
will change the fan between auto and on.
• Once complete, press
ret/clear
to return to the main screen or wait 15 seconds.
You may review your programs by using the
program
button to move through the programs for each day.
prog/day
will allow you to
change each day.
Note: When reviewing your programs, ignore the programs under weekday and everyday. ese programs will not aect 7 day
programming and can be ignored.
Once you are satised with your settings, press the
system
key to change heat or cool to the alternate mode and program that
mode. Once you are nished, if you wish to activate auto season changeover, use the
system
button to change to “auto” mode.
2
.
Programming (Cont.)
7 Day
Everyday programming allows you to set all 7 days of the week at the same time.
To program your thermostat in this manner:
1. Press the
program
button once to enter program mode and
prog/day
9 times for everyday programming. Everyday will be displayed
at the top of your screen and your hour and am/pm indicator will ash. e system mode you are programming will be
displayed at the bottom of the screen (heat or cool).
2. Use the or to set the starting hour of program 1. Remember, to change between am and pm, you must pass the
12th hour, unless in 24 hour time.
3. To move to minutes, press the
program
button again. or will adjust the minutes in increments of 10.
4. Press the
program
button again to change to the temperature setting. e and will adjust the temperature for that
program.
5. Use the
system
button to change to your alternate system mode (heat or cool) and set the temperature for it using the
or buttons. You may also wait until you have one mode programmed and return later to program the other.
Note: e times for heating and cooling within each program period will always be the same.
6. At this time, you can use the “ sensor” or
fan
button to change the temperature reporting location or fan setting for this
program if you choose to change them.
7. Once you have nished with program 1, press
program
to change to program 2. e hour and am/pm indicator will be ashing
for program 2 and your system mode will be displayed at the bottom of the screen. Follow the same process throughout all 4
programs.
Everyday