Filter
Top Products
Replace plate on back of handle,
by inserting projection on plate
into lower hole on handle. Tabs
on handle bail will fit into notches
on plate. Position nut on bolt and
tighten with screwdriver.
C. Attach outer bag
to cleaner
The outer bag is connected at the
rear of the cleaner by hooking the
two projections at the bottom of
the outer bag assembly into the
grooved plate extending from
back of cleaner base.
Then slide the lock lever (located
just above the cleaner opening)
to the left and fit bag against
opening. Slide the lock lever to
the right to fit completely over
the bag lock.
Attach the bag to the spring
hook, located on the top section
of the handle.
7