Filter
Top Products
5. Place belt on pulley.
belt nearer cleaner should be in
line with projections on bottom
of cleaner. Placing the belt in this
position enables the agitator to
rotate in the proper direction.
6. Replace bottom plate, by put-
ting metal knobs on plate into wire
holders underneath front of
cleaner. Pivot plate into position
over agitator and latch securely.
Agitator brushes
When to replace brushes
Disconnect cleaner from electri-
cal outlet before checking
brushes.
When brushes are worn and
bristles do not touch the edge of
a card held across the bottom
plate at the agitator opening,
they should be replaced. Always
replace both brushes at the same
time to maintain cleaning effec-
tiveness.
19