Filter
Top Products
The converter must first be as-
sembled to the hose by inserting
the converter into the hose con-
nectar
.
1
CONNEC-TOR
CONi/ERTER
1
Push connector and converter to-
gether and twist until the projec-
tions on the converter fit into the
holes on the hose connector. This
unit should remain assembled for
all future tool use.
Using cleaning tools
A. Attach converter
Disconnect cleaner from electri-
cal outlet. Cleaner must not be
plugged in when positioning or
removing converter.
Grasp the converter; turn red
converter lock away from the
hose.
13
With cleaner in upright position,
grasp handle and lean cleaner
backwards until handle is flat on
the floor and the underside is visi-
ble.
Place plastic latches of converter
onto metal rim of bottom plate.