Filter
Top Products
M-511401 96d User Manual 11
8/10 Honeywell
Introduction
Installation Instructions
Surface Mount Installation
It is recommended that controllers be installed 5 feet (1.5 m) above the
floor, at approximate eye level.
Mark the holes as shown:
• Height markers 6 13/32” apart
• Width markers 10 9/16” apart
• Pre-drill 1/4” mounting holes as needed
• Securely mount the 96D using the appropriate screws
Wiring for the unit must be passed through the knock-outs provided at
the bottom of the unit.
6
5/16”
13
1/4
16 cm
33.6 cm
1.52 m
5.0 ft