Honeywell 8 Home Security System User Manual


 
25
Groups (Pre V4 Only)
This option assigns group access to the MAX user. The MAX user
must be assigned a group that is common to the MAX moduleto permit
the access control functions to operate. If the MAX user does not have
access to the group assigned to the module, the access control functions
are denied. The Modify Groups option is only available when groups
have been enabled by the engineer. The system defaults to groups
disabled.
On selecting the Modify Groups option, the groups currently allocated
to the user are displayed. All users default to group 1. Pressing the
group number toggles the group assigned to the user. Pressing 2 and 3
assigns groups 2 and 3 to the user. Pressing 1 (while group 1 is already
assigned) removes group 1 from the MAX user; press the ent key to
accept the programming and return to the previous menu level.
Galaxy 500, 504 and 512
The Galaxy 500 has 16 groups, the 504 and 512 have 32 groups.
These are displayed on the keypad in blocks of eight groups,
labelled A, B, C and D. Use keys A> or <B to move between the
group blocks. Press keys 1 – 8 to assign the groups in each block to
the user.
Summer (User Level 6)
On the first day of each year, the British Summer Time (BST) Start date
is set to the last Sunday in March and the End date is set to the last
Sunday in October.
The operation of the Summer option is as follows: At 01 : 00 hours on
the Start date, the system clock advances to 02 : 00 hours. At 02 : 00
hours on the End date, the system clock goes back to 01 : 00 hours
(midnight).
Note:The time always changes with reference to GMT. For
example, Italy which is + 1 hour would be:
Last Sunday in March - 02.00 to 03.00
Last Sunday in October - 03.00 to 02.00
The Start and End dates can be reprogrammed by authorised user
codes. Press the A> key to modify the Start date or the <B key to select
the End date. The new date must be a valid four digit number in the day
month format (dd/mm).
Galaxy 504
The Summer option can only be modified by the engineer.