Honeywell 8 Home Security System User Manual


 
22
• Group Choice
Users can be allocated to more than one group, but also have the
choice of which of the allocated groups to view, set or unset.
Pressing * key while assigning groups to the user assigns the
group choice feature.
Notes: 1.The manager has fixed access to all system groups. This
cannot be reprogrammed.
2.The manager is assigned group choice by default, but the
feature can be removed.
3.Users authorised to access the Codes option can only assign
groups that have been assigned to their user code. A user
who does not have access to group 4, cannot assign group 4
to another user code.
Max Number
Each MAX card has a unique 10 digit number laser etched onto it. A
MAX card is assigned to a user by entering this number in the Max No
option. The number identifies the MAX card to the system and refer-
ences it to the user it has been assigned to.
Each MAX Number defaults to 0000000000 (ten zero’s):
1. Press and hold the B key until the zeros are deleted.
2. Enter the unique 10 digit number which is laser etched onto the
MAX card.
3. Press the ent key to save the programming and return to the
previous menu.
Note: A MAX number can be assigned to a user code that does not
have a PIN allocated to it. All other options for this user are valid for the
MAX card. It is recommended that MAX numbers should be assigned
to users not requiring a PIN at the Max Users menu option.
When a MAX number has been assigned to a user number, a lower case
(m) is displayed on the top line of the user number details screen.
A # assigned to the max number makes the max function dual focus, ie it
needs the pin entered first. A star * assigned to the max number makes
the card dual access, ie it needs another card to open doors.