Honeywell 8 Home Security System User Manual


 
16
Codes (User Level 6)
Purpose
The Codes menu option enables the managers, (user level 6), to allocate
PINs and related information to users. The codes option is divided into
three sub–menus:
1. User Codes
Sub divided into nine menus (depending on panel used and whether
the group and MAX Mode options are enabled) that determine all
of the access information for users with Personal Identification
Numbers (PINs). This menu also assigns MAX details to user
numbers.
2. Pin Warning
Available only on the Galaxy 128, 500, 504 and 512. This option
determines the warning period given to users prior to the
programmed Pin Change date.
Note: The valid period for Pin Change codes is programmed by
the installation engineer.
3. Max Users (Pre V4 Only)
This option is only available if the MAX mode is enabled. The
option is subdivided into two menus that assign the MAX card to
users who do not have a PIN assigned.
Manager Code
The manager code is authorised to:
Program the USER CODES option for each of the user codes.
Allocate other codes to user level 6.
Modify the manager PIN (the manager PIN cannot be deleted)
Assign the MAX features to the code.
The manager code defaults to group choice when groups are ena-
bled. The manager is able to toggle the group choice option on and
off (using the * key) as required.
Galaxy 8 & 18
The manager code defaults to accessing the quick menu.
Note: The MAX is the Proximity Access Reader which can be
connected to the Galaxy system. This also refers to the
MicroMAX, the enhanced version of the MAX.