Filter
Top Products
Security System Operation (cont'd)
22
How to Remove Bypassed Zones
A bypassed zone will automatically be unbypassed when you disarm
the system. If a zone is bypassed, you can remove the bypass as
follows:
SCREEN ACTION
1. View bypassed zones by pressing the
SHOW ZONES button.
While the TouchCenter is requesting and
receiving the zone data from the control
panel, the screen displays "Please Wait!".
Then the zones, along with their current
status, are displayed.
2. Remove zone bypasses by pressing
the CLEAR BYPASSES button.
Note: Bypassed zones are indicated by
the Bypass icon
.
3. The "User Authorization" screen is
displayed with the instructions To Clear
Bypasses, Enter Code.
Note: If the system is armed and you
unbypass a zone, it will disarm the
system.
Enter your 4-digit user code. The "More
Choices" screen is displayed showing the
system as Ready to Arm.
Note: This will not occur if any zone(s) is
open (not ready).