Filter
Top Products
System Overview (Cont'd)
13
will time out in 30 seconds even though it is not visible. Then the
keypad will reset into the Normal Mode (or Safe Mode if this is the
third time that the warning message appeared).
While in the Safe Mode, the Home screen will display the Security
Button, Panic Button, and a message at the bottom of the screen as
shown below:
Note that this is a limited mode of operation. While in this mode:
• You can use the Security button to access the Console Emulation
Mode of operation to try to clear your faults, disarm the system, or
enter additional Alpha Keypad commands specified in your panel
User Guide. You can perform almost all functions that you can
perform from a standard non-graphic alpha keypad.
• You can press the “Panic” key and generate Emergency Messages
as defined in the panel's home partition for this TouchCenter.
• The Armed and Ready LEDs on the front of the TouchCenter will
indicate the TouchCenter’s home partition status. The Message (
on
models with Voice feature
) or Trouble (on models without Voice
feature) LED is not active in the Safe Mode.
• The Chime mode will function in the Safe Mode: however, you will
not have Voice, Voice Chime, or Message capability if using the
6271V and 6271CV.
• When in Safe Mode, the lock on the Security button on the Home
screen will always be shown in the unlocked position. Refer to the
Armed LED for the true armed status of your system.
• When an alarm occurs in the Safe Mode, it is displayed on the
Console mode screen only. It will not be shown on the Home screen
and the lock on the Home screen will not change color – it will
appear in the unlock position.