Filter
Top Products
21
4. Troubleshooting
Error & Status Messages on the Display
Panel
❖
❖❖
❖ Status messages
❖
❖❖
❖ Alert messages
Message Status
Hex Dump Mode In Hex Dump mode, the machine receives data in hexadecimal
format. Turn off the machine after printing, and then turn back
on.
Offline The machine is offline. Set the machine online by pressing [On-
line] on the display panel to start printing.
Please Wait The machine is readying the development unit. Wait for a
while.
Printing... The machine is printing. Wait for a while.
Ready The default ready message. The machine is ready for use. No
action is required.
Resetting Job... The machine is resetting the print job. Wait until “Ready” ap-
pears on the display panel.
Waiting... The machine is waiting for the next data to print. Wait for a
while.
Messages/Second messages Description Solution
Close duplex unit cover. The cover of the duplex unit is
open.
Close the cover of the duplex
unit.
Collate has been cancelled. The collate print function has
been cancelled.
Increase memory capacity.
When adding a memory mod-
ule to the machine, contact
your sales or service represen-
tative.
DIMM has a problem. An error has occurred in the
DIMM inside the machine.
Contact your sales or service
representative.