Combi HP thermostatic mixer shower
Introduction 1
Safety warnings
1
Main components
2
Siting requirements
3
Typical suitable installations
4
Preparing the mixer valve
6
Siting of the shower
6
Fitting the shower to the wall - Exposed
7
Rising and falling supplies
7
Rear entry supplies 1
0
Fitting the shower to the wall - Built-in 1
3
Solid wall 1
3
Hollow wall 1
6
Shower cubicle or panel 1
8
Flushing procedure 2
0
Fitting the tamperproof fixed head - Exposed 2
1
Fitting the tamperproof fixed head - Built-in 2
2
Fitting the fixed head - Built-in 2
3
Fitting the bulkhead 2
4
Operating the shower 2
5
Adjusting the maximum temperature stop 2
6
Spare parts 2
7
Fault finding 2
9
Guarantee, service policy, etc. rear cove
r
CONTENTS Page
To check the product suitability for commercial and multiple installations, please contact
Triton’s specification advisory service before installation.
Telephone: 0870 067 3767
Facsimile: 0870 067 3334
E mail: technical@tritonshowers.co.uk