Filter
Top Products
Heatilator • ICON DV-IDV Series • 4042-575 • Rev. S • 5/1150
L. Installing External Refractories
Open Refractory Package (Figure 15.17)
• 1 - LH side refractory panel
• 1 - RH side refractory panel
• 1 - Front hearth refractory panel
Right
Left
Front Hearth
Notches indicate
top of refractory
Figure 15.17 Refractory Pieces
Install Side Refractories
• Locate right side refractory panel. See Figure 15.17.
• Install rod in hole in glass frame top. See Figure
15.18.
Insert Pin
Notch
Figure 15.18 Insert Pin into Top Frame
Insert Pin
Swedge
Figure 15.20 Insert Pin into Bottom Frame
• Install rod with swedge (Figure 15.19) in hole in glass
frame bottom. See Figure 15.20.
• Repeat for the left side refractory panel.
Swedge
Figure 15.19 Swedge
Bottom Front Hearth Refractory
• The fi rescreen must be pulled up to install the hearth
refractory (Figure 15.21). Slide hearth refractory
under side refractories until tight against glass. See
Figure 15.22.
Figure 15.21 Move Firescreen
Figure 15.23 Finished Refractory Installation
Figure 15.22 Placing Bottom Front Hearth Refractory