Filter
Top Products
Heatilator • ICON DV-IDV Series • 4042-575 • Rev. S • 5/11 3
Safety Alert Key:
• DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.
• WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.
• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE: Used to address practices not related to personal injury.
Table of Contents
A. Congratulations 2
B. Limited Lifetime Warranty 5
1 Listing and Code Approvals
A. Appliance Certifi cation 7
B. Tempered Glass Specifi cations 7
C. BTU Specifi cations 7
D. High Altitude Installations 7
E. Non-Combustible Materials Specifi cation 7
F. Combustible Materials Specifi cation 7
G. Electrical Codes 7
H. Requirements for the Commonwealth
of Massachusetts 8
User Guide
2 Operating Instructions
A. Gas Fireplace Safety 9
B. Your Fireplace 9
C. Clear Space 10
D. Decorative Doors and Fronts 10
E. Fixed Glass Assembly 10
F. Remote Controls, Wall Controls and Wall Switches 10
G. Before Lighting Fireplace 10
H. Lighting Instructions (IPI) 11
I. After Fireplace is Lit 12
J. Flame Adjustment Control 12
K. Frequently Asked Questions 12
3 Maintenance and Service
A. Maintenance Tasks-Homeowner 13
B. Maintenance Tasks-Qualifi ed Service Technician 14
Installer Guide
4 Getting Started
A. Typical Appliance System 15
B. Design and Installation Considerations 16
C. Tools and Supplies Needed 16
D. Inspect Appliance and Components 16
5 Framing and Clearances
A. Select Appliance Location 17
B. Construct the Appliance Chase 18
C. Clearances 18
D. Mantel and Wall Projections 19
6 Termination Locations
A. Vent Termination Minimum Clearances 20
7 Vent Information and Diagrams
A. Approved Pipe 22
B. Vent Table Key 22
C. Use of Elbows 22
D. Measuring Standards 22
E. Vent Diagrams 23
8 Vent Clearances and Framing
A. Pipe Clearances to Combustibles 28
B. Wall Penetration Framing 28
C. Install the Ceiling Firestop 29
D. Install Attic Insulation Shield 30
9 Appliance Preparation
A. Secure and Level the Appliance 31
10 Install Vent Pipe
A. Assemble Vent Sections 32
B. Assemble Slip Sections 33
C. Secure the Vent Sections 33
D. Disassemble Vent Sections 34
E. Install Metal Roof Flashing 34
F. Assemble and Install Storm Collar 35
G. Install Vertical Termination Cap 36
H. Heat Shield Requirements for Horizontal
Termination 36
I. Install Horizontal Termination Cap 37
11 Shrouds
A. HHT Shrouds 38
B. Field Constructed Shrouds 38
12 Gas Information
A. Fuel Conversion 40
B. Gas Pressure 40
C. Gas Connection 40
D. High Altitude Installations 40
13 Electrical Information
A. Wiring Requirements 41
B. Intellifi re Ignition System Wiring 41
C. Optional Accessories Requirements 41
D. Electrical Service and Repair 41
E. Junction Box Installation 42
14 Finishing
A. Mantel and Wall Projections 43
B. Facing Material 43
C. Non-combustible Finishing Material 44
15 Appliance Setup
A. Remove Shipping Materials 45
B. Remove Fixed Glass Assembly 45
C. Remove Materials Shipped Inside Firebox 45
D. Clean the Appliance 45
E. Accessories 45