Filter
Top Products
Heat & Glo LifeStyle Collection • Twilight-II • 2087-900 Rev. G • 12/056
3
Framing and Clearances
NOTE:
• Illustrations reflect typical installations and are
FOR DESIGN PURPOSES ONLY.
• I
llustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual
design preference.
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffic areas.
A. Selecting Appliance Location
When selecting a location for your appliance it is important
to consider the required clearances to walls (see Figure 3.1).
Figure 3.1 Appliance Locations
Model
ABCDE
Minimum Minimum
-
Minimum
-
Twilight-II
Inches
43 1/2 24 36 43
Millimeters
1092.2 12.7 609.6 914.4 1092.2
NOTE: For actual appliance dimensions refer to Sec-
tion 13.
In addition to these framing dimensions, also reference the following section:
• Clearances and Mantel Projections (Section 3.B and 3.C)
GLASS
FLUSH TO EXTERIOR INSULATED ENVELOPE
GLASS
A
B
B
D
E
C
B
GLASS
FLUSH TO EXTERIOR INSULATED ENVELOPE
GLASS