Filter
Top Products
Heat & Glo LifeStyle Collection • Twilight-II • 2087-900 Rev. G • 12/05 23
STEP 4. LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other
end on the peak of the burner. Do not cover any port holes.
STEP 5. LOG #4 (SRV2005-703): Locate the sharp notch on log #4 against the grate tine as shown. The
smooth cutout on log #4 should rest on the burner surface. As with log #3, be careful not to cover any port holes.
STEP 6. LOG #5 (SRV2005-704): Using the sharp notch on the heavy end of log #5, align it on the grate
tine and on log #4 as shown.
3
4
5
Sharp
Notch
Sharp
Notch
Smooth Cutout
2
1
3
2
1
1