Filter
Top Products
25
Heat & Glo • PALOMA-BZ-MOD, PALOMA-GR-MOD, PALOMA-GY-MOD • 2189-900 Rev. i • 5/12
FIG. A 90 DEGREE ELBOW
FIG. C MINIMUM CLEARANCE
HTI VENT HHW2 PART
#841-0670 (RECOMMENDED
FOR OPTIMUM PERFORMANCE)
TRIM RING
WALL THIMBLE
CENTER LINE
MINIMUM OF 6 IN. (152 MM)
OF PIPE THROUGH THE WALL
INTERIOR WALL - 2 IN. (51
MM) CLEARANCE FROM
REAR OF STOVE
HEAT SHIELD OVER
TOP HALF OF PIPE
Figure 5.35
FIG. B 45 DEGREE ELBOW
90° ELBOW
PIPE LENGTH
PIPE LENGTH
CENTER LINE
TRIM RING
HTI VENT HHW2 PART #841-0670
(RECOMMENDED FOR OPTIMUM PERFORMANCE)
PLACE MARK WHERE PROTRUDES THROUGH
EXTERIOR WALL TO CUT OFF EXCESS
USE HEAT SHIELD / WALL THIMBLE
45° ELBOW
5 IN. (127 MM) CLEARANCE
FROM APPLIANCE CORNER
5 IN. (127 MM) CLEARANCE
FROM APPLIANCE CORNER
TO COMBUSTIBLE WALL
HEAT SHIELD
OVER PIPE
TRIM RING