Filter
Top Products
14 Hearth & Home Technologies • 6100PLUS • 4041-127 Rev D • 09/05
A. Recommendation for Wire
• Requires 110 VAC to be wired to the junction box for proper
operation of the appliance.
Battery polarity must be correct or module damage will
occur.
CAUTION
Shock Risk
Explosion Risk
Do NOT wire 110V to valve.
Do NOT wire 110V to wall switch
• Incorrect wiring will damage millivolt
values.
• Incorrect wiring will override IPI safety
lockout and may cause explosion.
WARNING
8
Electrical Information
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
CAUTION
Shock Risk
• Replace damaged wire with type 105° C
rated wire.
• Wire must have high temperature
insulation.
CAUTION
B. Connecting to the Appliance
• Low voltage and 110 VAC voltage cannot be shared within
the same wall box.