Filter
Top Products
Hearth & Home Technologies • 6100PLUS • 4041-127 Rev D • 09/05 11
6
Appliance Preparation
Do NOT notch into the framing around the appliance
spacers.
CAUTION
Figure 6.1 Proper Positioning, Leveling and Securing of an
Appliance
A. Securing and Leveling the Appliance
Fire Risk
• ALWAYS maintain specifi ed clearances
around the appliance.
• Do NOT notch into the framing around
the appliance spacers.
WARNING
Failure to keep insulation or other materials
away from vent pipe may cause fi re.
The diagram shows how to properly position, level, and se-
cure the appliance. Nailing tabs are provided to secure the
appliance to the framing members.
• Place the appliance into position.
• Level the appliance from side to side and front to back.
• Shim the appliance as necessary. It is acceptable to use
wood shims.
• Bend out nailing tabs on each side.
• Keep nailing tabs fl ush with the framing.
• Secure the appliance to the framing by using nails or
screws through the nailing tabs.
Fire Risk!
• Prevent contact with sagging, loose
insulation.
• Do NOT install against combustible
materials such as exposed insulation,
plastic and insulation backer.
WARNING