Heat Controller HMG**X1E Air Conditioner User Manual


 
709557A (Replaces 7095570)
INSTALLATION / PERFORMANCE CHECK LIST
INSTALLER NAME:
CITY: STATE:
INSTALLATION ADDRESS:
CITY: STATE:
UNIT MODEL #
UNIT SERIAL #
Minimum clearances perpage4? YES NO
Is the unit properly installed and
leveled?
YES NO
Does condensate drain properly
inbothdraintubes?
YES NO
Has the owner’s information been
reviewedwiththehome-owner?
YES NO
Has the literature package been
leftneartheappliance?
YES NO
ATTENTION INSTALLERS:
It is your responsibility to know this product better than your customer.
This includes being able to install the product according to strict
safety guidelines and instructing the customer on how to operate
and maintain the equipment for the life of the product. Safety should
always be the deciding factor when installing this product and using
common sense plays an important role as well. Pay attention to all
safety warnings and any other special notes highlighted in the manual.
Improper installation of the air handler or failure to follow safety
warnings could result in serious injury, death, or property damage.
These instructions are primarily intended to assist qualified individuals
experienced in the proper installation of this appliance. Some local
codes require licensed installation/service personnel for this type of
equipment. Please read all instructions carefully before starting the
installation. Return these instructions to the customer’s package for
future reference.
ELECTRICAL SYSTEM:
Electricalconnectionstight? YES NO
Linevoltagepolaritycorrect? YES NO
Supply Voltage: ____________________________
_______(V)
Hasthethermostatbeencalibrated? YES NO
Isthethermostatlevel? YES NO
Istheheatanticipatorsettingcorrect? YES NO
Specifications & illustrations subject to change without notice or incurring obligations.
Jackson, MI | Printed in U.S.A. (11/12)