Filter
Top Products
9
P68 Pellet Stove
Outside air flex pipe
goes here.
Inlet Cover part#
1-10-08542
Flex pipe part#
2-00-08543 (3')
1-00-08543 (25')
Outside Air
Here are four benefits of outside air:
1. Having air introduced from outside the living area
boosts overall efficiency.
2. It eliminates draft problems that can occur in tight
homes.
3. It reduces smoke spillage in the event of a power
failure.
4. It allows your vent termination to be as close as
18" from windows or doors.
Outside air is optional except in mobile
homes and where building codes require. The
benefit of outside air is mainly noticed in small, very
tight, houses.
To install outside air use 2 3/8" I.D. non-com-
bustible flex pipe. There is a break-away hole on the
rear panel of the P68 stove which must be removed
before connecting the flex pipe. The pipe should be
run outside and terminate to the side or below the
vent pipe outlet so the flue outlet is more than 12"
from the inlet cover. The maximum length run of this
pipe is 15 feet. If a longer run is needed the size
must be increased to 3". Inlet cover part number 1-
10-08542 should be used to keep birds, rodents,
etc.out of the pipe.
HRV
When installing in a house with a Heat Reclaim-
ing Ventilation System (HRV) be sure the system is
balanced and is not creating a negative pressure in
the house.
Venting
Evaluation notes were added to the output document. To get rid of these notes, please order your copy of ePrint IV now.