Filter
Top Products
29
P68 Pellet Stove
OPTIONS
Side Heat Shields
Side heat shields are available to reduce the
clearance to combustible materials.
Part #1-00-06716
Hopper Extension
The hopper extension allows you to put more pellet
fuel in the hopper and extends burn time on one
load of pellets. The hopper extension adds 60
pounds to the existing 76 pound hopper capacity,
allowing you to load 136 pounds of pellets at one
time.
Part #1-00-08636
Floor Protector
The P68 Steel Floor Protector measures 25 inches
wide by 33 inches deep. It is made of 20 gauge
steel. This is the minimum size for floor protection
with this unit.
Part# 1-00-06727
20 gauge steel
floor protector
Decorative Tile/Grey Slate Options
The decorative tile and slate measure 11.938" x
5.938". The tile/slate trim is necessary to hold the
tile/slate in place on the stove. There are 10
decorative tile choices, and 4 decorative slate
choices. See dealer for samples.
33"
25"
5.938"
11.938"
frame
tile/slate
Evaluation notes were added to the output document. To get rid of these notes, please order your copy of ePrint IV now.