Filter
Top Products
26
P68 Pellet Stove
P68 Maintenance - Cleaning the Feeder Body
Pellet fines will accumulate in the feeder body over a
period of time; therefore, a yearly inspection and
cleaning of this must be performed.
To clean out fines:
1. Remove right rear cover panel ( see rear cover
installation on page 4 ).
2. Remove wing nut and feeder cover on the right side
of the feeder.
3. Use a vacuum cleaner to remove all fines.
4. Reinstall feed cover, wing nut, and right rear cover
panel.
Fig. 39
Feeder Cover
Wing Nut
Pellet Fines will build up in this area
5/16" Hex Head
Screws (3 on
each side)
5/16" Hex Head
Screws (3 on
each side)
Evaluation notes were added to the output document. To get rid of these notes, please order your copy of ePrint IV now.