Filter
Top Products
Pump Module Assembly
312349G 5
Pump Module Assembly
Models 247706 and 247707 only
For divider valve-based automatic lubrication systems.
(Unless otherwise indicated, see F
IG. 1).
1. Install Pump (D) on Reservoir (P).
2. Remove Vent Valve Hydraulic Control (J) fitting and
replace with Plug (R) (F
IG. 6, page 9).
3. Install Hydraulic Control Module on Reservoir (P).
4. Connect Tank Line (G) to Pump (D).
5. Connect Pump High Pressure Hydraulic Line (H) to
Pump (D).
6. Install Pressure Relief Kit (247902) to Pump Outlet.
7. Install model number label as shown in F
IG. 2.
F
IG. 1 Model 247706 shown
D
P
Hydraulic Control
Module
G
H
Kit 247902
ti11453
Pressure Relief
F
IG. 2
Install
Label Here
Identification