Filter
Top Products
Troubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions
5
www.GEAppliances.com
Time Format
■ Time is displayed in AM/PM format.
■ AM/PM format is <AM|PM>hh:mm where the leading zero
of the hour will be suppressed. Time displayed will be in the
range of 12:00 AM to 11:59 AM and 12:00 PM to 11:59 PM.
Figure 6: Time Display Format
Review and Change the Setpoint Temperature
■ In
NORMAL
mode, press ▲ or ▼. The clock and the day of the
week indicator will be cleared. The setpoint temperature and
SET TEMP
indicator will be displayed. The
HEAT
,
COOL
or
AUTO
indicator will turn on indicating the current operating system.
Figure 7: Temperature Setpoint Example
■ To change the setpoint temperature, press and hold either ▲
or ▼ for more than 1 second. The entire display will flash once
and the setpoint temperature can be changed. Continue to
hold the key or release and press again to adjust the setpoint
temperature.
■ Press and hold the key for 2 seconds for fast advance.
■ Press the
HOLD/RETURN
button to return to
NORMAL
mode
immediately or wait 5 seconds to return to
NORMAL
mode
automatically.
Figure 8: Display will Flash Once
Figure 9: Display with New Setpoint Temperature