FireplaceXtrordinair 36A-BI Indoor Fireplace User Manual


 
Page 4
FEATURES AND SPECIFICATIONS
¥ EPA Phase II approved.
¥ Heavy duty steel construction.
¥ Thermostat for automatic control of
the blower.
¥ Large firebox capacity - 3 cu. ft.
¥ Long burn time - 10 Hours.
¥ Large glass doors for maximum
visibility.
¥ Firebrick lining for firebox
protection.
¥ 388 CFM blower for convection
heat and outside combustion air.
¥ Gas line sleeve through the left
side of the firebox for easy
installation of gas log lighter or
gas log set
Heating Capacity ............................................................................ up to 2,500 sq. ft. maximum
BTU Output/hr.................................................................................. 10,300 to 54,700
Overall Efficiency ............................................................................ 73 % (DEQ Method)
Emissions grams/hr........................................................................ 4.1 (EPA Method)
Maximum Burning Time................................................................. 10 Hours
Fuel.................................................................................................... Solid Wood or Natural Gas
Flue Opening Diameter ................................................................ 8 in.
36A-BI 36A-ZC
Overall Width (Not Including Faceplate)..................................... 32 1/2 in. 42 in.
Overall Depth................................................................................... 23 27 in.
Emissions, Efficiency, Heating Capacity and Burn Times may vary depending
on actual home floor plan, type of fuel used, and moisture content. Emissions
and efficiency numbers are those that have been certified by the U.S. E.P.A.
and the Oregon Department of Environmental Quality.
36 A-BI 36 A-ZC